SMA SC 400HE - Manual (Page 65)

SMA Solar Technology AG 6 External Grid Monitoring Relay
Operating Manual SC4-63HE-BE-BEN103280 65
6.3 Configuration
6.3.1 Switching into Configuration Mode
You may not perform any configurations unless the Sunny Central is not in operation!
6.3.2 Displaying the Basic Settings
Proceed as follows to display the basic settings of the monitoring relay:
1. Press the [Menu] and [Clear] button at the same time.
☑ The grid monitoring relay menu is displayed.
2. Navigate to the "Software version" or "Language" menu with the [Display ↓ ] button.
☑ The following displays appear depending on the menu selected.
"Select" input mode
Pressing the [Select] button activates the input mode. It
allows you not only to view the following screens but
also to modify them within the specified limits. You can
move the following screens forward by one screen by
pressing the [Select] button.
If you have configured a parameter to "OFF", then the
associated screens will not be displayed and you will
also not be able to edit them. You can move the display
forward to the next parameter by pressing the [Select]
button.
Software version
Language selection German/English