6 display firmware version, 3 measured data, 1 measured data via sunny data control – SMA SC 400HE User Manual
Page 33: Display firmware version, Measured data, Measured data via sunny data control
SMA Solar Technology AG
4 Sunny Central Control
Operating Manual
SC4-63HE-BE-BEN103280
33
4. Select the displayed time with the arrow buttons and confirm by pressing [ENTER].
5. Set the hours and minutes with the arrow buttons and confirm each setting with [ENTER].
Complete the entry by pressing [ENTER] again.
☑ The desired time is now set.
4.2.6 Display Firmware Version
• Select Device Set-up > System > Firmware.
4.3 Measured Data
4.3.1 Measured Data via Sunny Data Control
The data is compiled in a channel record.
4.3.2 Requesting Measured Data from the Sunny Central Control
1. Select Long-Term Data > Meas. Chn. > SC...SCXXX.
☑ The Sunny Central Control displays the measurement channels selected for the display
(see section 8 "Sunny Central Control Measurement Channels", page 89).
2. Select measurement channel.
3. Select the date and confirm by pressing [ENTER].