SMA SC 400HE - Manual (Page 36)

4 Sunny Central Control SMA Solar Technology AG
36 SC4-63HE-BE-BEN103280 Operating Manual
1. Enter password (see section 4.2.2 "Entering the Password", page 32).
2. Select Device Set-up > Parameters.
☑ The menu with the available parameter groups opens (see section
9 "Parameters", page 91).
3. Using the [ ↓ ] button, select the parameter group
in which a parameter is to be changed.
4. Using the [ ↓ ] button, select the parameter to be
changed.
5. Take note of the parameter's preset value.
6. Exit the menu with [ESC].
4.4.2 Saving Parameters
1. Enter password (see section 4.2.2 "Entering the Password", page 32).
2. Select Device Set-up > Parameters > save parameter.
3. Press [ENTER] twice.
4.4.3 Resetting Parameters
1. Select Device Set-up > Parameters.
☑ The menu with the available parameter group opens (see section 9 "Parameters", page 91).
2. Using the [ ↓ ] button, select the parameter group to be changed.
3. Using the [ ↓ ] button, select the parameter to be changed.
4. Enter the parameter's original value.
5. Confirm the change with [ENTER].