HEIDENHAIN iTNC 530 (60642x-03) - Manual (Page 500)

500 Programming: Multiple axis machining
12.3 Inclined-t
ool mac
h
ining in the tilt
ed plane
Inclined-tool machining via normal vectors
 Retract the tool
 Activate M128
 Define any PLANE function; consider the positioning behavior
 Execute program with LN block in which the tool direction is defined
by a vector
Example NC blocks:
Only one directional vector can be defined in the LN block.
This vector defines the incline angle (normal vector NX, NY,
NZ
, or tool direction vector TX, TY, TZ).
...
12 L Z+50 R0 FMAX M128 Position at clearance height, activate M128
13 PLANE SPATIAL SPA+0 SPB+45 SPC+0 MOVE SET-UP50 F1000 Define and activate the PLANE function
14 LN X+31.737 Y+21.954 Z+33.165 NX+0.3 NY+0 NZ+0.9539 F
1000 M3 Set the incline angle with the normal vector
... Define machining in the tilted working plane