HEIDENHAIN iTNC 530 (60642x-03) - Manual (Page 337)

HEIDENHAIN iTNC 530 337
9.8 A
d
ditional functions
Current position in the active
coordinate system, 270 1 1 X axis
2 Y axis
3 Z axis
4 A axis
5 B axis
6 C axis
7 U axis
8 V axis
9 W axis
Status of M128, 280 1 - 0: M128 inactive, value not equal to 0: M128
active
2 - Feed rate that was programmed with M128
Status of M116, 310 116 - 0: M116 inactive, value not equal to 0: M116
active
128 - 0: M128 inactive, value not equal to 0: M128
active
144 - 0: M144 inactive, value not equal to 0: M144
active
Current system time of the TNC,
320 1 0 System time in seconds that have elapsed since
00:00 of January 1, 1970
Status of global program
settings GS, 331 0 0 0: No global program setting active,
1: A global program setting active
1 0 1: Basic rotation active, otherwise 0
2 0 1: Swapping axes active, otherwise 0
3 0 1: Mirroring axes active, otherwise 0
4 0 1: Shifting active, otherwise 0
5 0 1: Rotation active, otherwise 0
6 0 1: Feed rate factor active, otherwise 0
7 0 1: Disabling axes active, otherwise 0
8 0 1: Handwheel superimposition active, otherwise 0
Group name, ID no. Number Index Meaning