HEIDENHAIN iTNC 530 (60642x-03) - Manual (Page 289)

HEIDENHAIN iTNC 530 289
7.
3 Opening 3-D CAD data (sof
tw
ar
e option)
Operating the CAD viewer
Mouse functions
The following functions are available for mouse operation:
 In order to rotate the wire model shown in three dimensions you
hold the right mouse button down and move the mouse. After you
release the right mouse button, the TNC orients the model to the
defined orientation
 In order to shift the model shown: Hold the center mouse button or
the wheel button down and move the mouse. The TNC shifts the
model in the corresponding direction. After you release the center
mouse button, the TNC shifts the model to the defined position.
 In order to zoom in on a certain area with the mouse: Draw a
rectangular zoom area while holding the left mouse button down.
You can shift the zoom area by moving the mouse horizontally and
vertically as required. After you release the left mouse button, the
TNC zooms in on the defined area of the workpiece
 In order to quickly zoom in and out with the mouse: Rotate the
wheel button forward or backward
 Double-click with the right mouse button: Select standard view
Function Icon
Show shaded model
Show wire model
Show wire model without invisible edges
Adapt display size to screen size
Select standard 3-D view
Select plan view
Select view from below
Select view from left
Select view from right
Select view from front
Select view from behind