Configuration options, Example, Configuration options example – Grass Valley NV9000 Web Suite v.1.2 User Manual
Page 70
60
DHP Tab
Summary
Configuration Options
The 4 DHP pages can be individually enabled or disabled. The 4 DHP pages can be configured:
•
To show all or selected disembedders. For selected disembedders, a name/ID filter can apply.
•
To show all or selected embedders. For selected embedders, a name/ID filter can apply.
•
To show port numbers next to port names.
For information about configuring DHP pages, see
Example
Figure 3-1 shows an DHP routing example for the 4 tabbed pages described in the following
sections:
Fig. 3-1: Sample DHP Route
Standard source INA 410 is taken to standard destination OUTA 455 on all levels but two. The
remaining two levels (levels 3 and 4) are take from standard source INA 045. Except for the
breakaway involved, DHP would not be required. Because a breakaway occurred, the DHP soft-
ware routed INA 410 through DHP disembedder port 28 and INA 045 through DHP
disembedder port 29. The audio from these two ports are recombined in DHP embedder port
19 and forwarded, with the original video from INA 410 to standard output OUTA 455.
Std Out for Disembedder 29
INA 045
Disembedder 29
Embedder 19
Legend
Internal Route
Core Cable for Disembedder
Audio Channels
INA 410
Std Out for Disembedder 28
Disembedder 28
OUTA 455
Std In for
Embedder 19
Core Cable for Embedder