Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 99)

4. To exit to Maintenance, do the following:
a) Open the Confirm Exit panel, as instructed by the steps earlier in this procedure.
b) Tap the SoftKey next to the Shutdown mode prompt until it displays Maintenance .
When Maintenance is selected, the SoftKey to the left of the blue box changes to Exit .
c) Tap Cancel to abort the Exit command and return to the previous session.
d) Tap Exit to continue to exit.
The computer leaves the Dyno mode and the Windows operating system desktop is displayed.
e) To return to the Dyno mode from the Windows operating system desktop, double-tap the
Dyno S icon on the desktop.
Rebooting the Dyno and continue recording
1. Go to the HOME Page.
20140207 K2 Dyno S User Manual 99
Shutting the system down