Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 43)

2. Use the Jog Knob to cue the record train.
Both player channels are affected.
3. Press the Play button while cued back on the train.
Both player channels play back in sync.
Using PGM or PVW
This setting configures the playback channels as dependent channels. P1 becomes the channel that
plays to broadcast. P2 is used to preview or stage the next element to broadcast. Elements cued on
P2 (PVW) are transferred to the P1(PGM) by using the
Take button.
1. Enter PGM or PVW mode by selecting the softkey on the Home screen or by pressing Shift | P1 .
In this mode, when a clip is cued, it appears on the P2 channel.
2. Use the Jog Knob to change the in-point of the clip to the point desired.
3. Press the Take button from the center stalk.
The clip is transferred to the P1 channel and play.
P2 is now ready for cueing the next element.
Going back to Live/Rec
1. To return to the record train at the point of the current record., select your player channel P1 or
P2 button.
2. Press the Live button on the Right Bank of buttons.
This takes the player channel to the current available recording of the active angle.
20140207 K2 Dyno S User Manual 43
Playback