Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 38)

3. To change the transition duration for the Flying M/E and each of the five preset effects, do the
following:
a) In the first column enter a number less than 2:00 seconds but greater than or equal to 2 frames.
b) In the second column make settings as follows:
Applies the transition to both output audio and video. Video+Audio
Applies the transition to the audio while video cuts. Audio Only
Applies the transition to the video while audio cuts. Video Only
c) In the third column make settings as follows:
Creates a cross fade between the two consecutive events. Dissolve
Creates a flash of the selected color between the two events in the
list. The duration of the flash is determined by the effect duration.
To select the color, tap the adjacent color box and choose a color
from the palette. Matte
Configuration Network Tab from Transfer Setup
1. On the CONFIG screen, tap NETWORK .
38 K2 Dyno S User Manual 20140207
Configuration Screen