Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 28)

4. To configure alternative T-bar settings, select Alt .
The T-bar alternative configuration screen opens.
The four Set boxes set the custom speeds on the path of the T-bar, as indicated by their position
on the graphic range bar.
5. Move the T-bar to a position and tap a Set box to change settings as follows:
Description Options
Tap the top Set box to set the T-bar to top speed position. Select the
adjacent speed button and enter a speed in percentage for this T-bar
location, then press
OK .
Highest speed
Move the T-bar down to the top of the middle range and tap the upper
middle Set box. Select the adjacent speed button and enter a play back
speed in percentage for the middle range of the T-bar, then press
OK .
Upper middle speed
Move the T-bar lower down the bottom of the middle of the range and
tap the lower middle Set box. The adjacent speed button displays the play
back speed in percentage for the middle range of the T-bar. Lower middle speed
Move the T-bar to the lower limit and tap the lowest Set box. Select the
adjacent speed button and enter a speed in percentage for this T-bar
location, then press
OK .
Lowest speed
28 K2 Dyno S User Manual 20140207
Home Screen