Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 42)

Configuring the alternative playback speed
An alternate speed can be pre-programmed into the Play button.
1. On the HOME screen, in the T-bar section, tap the Fn+Play SoftKey.
A number key pad opens.
2. Enter the desired alternate play back speed by percentage.
3. Tap OK to set the speed and close the number keypad.
PGM/PGM Playback in green and red
When P1 or P2 buttons are lit in green and red, do the following:
a) Select P1 or P2 buttons from the K2 Dyno S Replay Controller.
b) Use the Jog Knob to cue the record train on the selected player.
Jogging cues only the selected channel.
c) To affect the selected channel, press the Play button on the cued record train.
PGM/PGM Playback in red and red
1. Press P1 | P2 buttons simultaneously to switch to Gang mode.
Both P1 and P2 buttons are lit in red
42 K2 Dyno S User Manual 20140207
Playback