Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 21)

Adjusting audio output
1. On the HOME screen, tap the audio meters section.
The Audio panel opens.
The audio output adjustment is selected by default.
2. Tap audio meters to select the channels you are adjusting.
3. Adjust audio output on the selected channels as follows:
• Select + or - to change the audio output level.
• Select Mute to silence the audio output.
• Select Reset to restore both input and output audio to their default levels.
20140207 K2 Dyno S User Manual 21
Home Screen