Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 86)

Navigating the Library
The Library is the storage for elements available beyond a session. It is also the gateway to the
network.
1. Open the LIBRARY screen.
All elements added to the library appear in the default bin.
2. Double-tap the bin title bar at the top of the screen to display all bins on the V: drive.
3. Double-tap the title bar again, to display all the bins on the K2 Dyno S Replay Controller.
4. Double-tap the title bar again to display all the servers on the network.
Copying clips
Clips can be copied from Highlight bin to the Library and vice versa.
1. To copy clips from Highlight bin to Library, do the following:
a) Open the HIGHLIGHT screen.
b) Select the clip or clips to be sent to the library.
c) Press
Shift | Add Lib buttons on the left bank of the K2 Dyno Replay Controller.
All clips selected are copied to the default bin in the Library. This allows access to the selected
clips after closing the session.
86 K2 Dyno S User Manual 20140207
Library