Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 40)

Exporting the Config information
You can save configuration settings and keywords tables to an external device. You can then load
the settings and tables to another K2 Dyno S Replay Controller, or for use later on the same K2
Dyno S Replay Controller.
1. Connect the storage device to one of the USB ports on the front of the server.
2. To navigate and find the external storage device, press Shift then from the CONFIG screen, tap
SAVE .
3. Once you have identified the location for storing the settings, tap ACCEPT to allow you to configure
the files to be created on the external source.
Importing the Config information
1. Connect the external storage device that contains the configuration file you are importing.
2. Press Shift , then from the CONFIG screen, tap LOAD .
3. Navigate to the configuration file you are importing.
4. Select the configuration file and tap ACCEPT .
The configuration is loaded and the settings are in place.
40 K2 Dyno S User Manual 20140207
Configuration Screen