Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 100)

2. From the bottom strip, select Shift Function Exit .
If required, the server can remain in record mode despite the state of the Dyno.
3. To continue recording and rebooting or shutting off the Dyno, tap the Continue Recording softkey
to change it to yes .
Dyno can be shut down or restarted at this point without interrupting the record train.
Rejoining a session
To rejoin a session that has been stopped but is still present on the Dyno, do the following:
1. Restart the Dyno.
2. Reconnect to the Server containing the Session to be reactivated.
3. Select the Session from the list on the right side of the screen.
4. To launch the session and restore it's elements, select Open Session softkey.
100 K2 Dyno S User Manual 20140207
Shutting the system down