Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 97)

Shutting the system down
Shutting the system down
There are three modes to shut down the system:
• Exit to Startup screen
• Exit to Shutdown
• Exit to Maintenance
1. Press the Shift button and then from the HOME screen or the CONFIG screen, tap the EXIT SoftKey.
This is the first step in shutting down the K2 Dyno S Replay Controller in three different modes.
The Confirm Exit panel opens. The default shutdown mode is the Startup screen.
2. To exit to Startup screen, do the following:
a) Open the Confirm Exit panel, as instructed by the steps earlier in this procedure.
b) Tap Cancel to abort the Exit command and return to the previous session.
c) Tap Restart to continue to exit.
The K2 Dyno S Replay Controller restarts accordingly and displays the Server list, ready to
configure a new session.
20140207 K2 Dyno S User Manual 97