Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 98)

3. To exit to Shutdown, do the following:
a) Open the Confirm Exit panel, as instructed by the steps earlier in this procedure.
b) Tap the SoftKey next to the Shutdown mode prompt until it displays Shutdown .
When Shutdown is selected, the SoftKey to the left of the blue box changes to Shutdown .
c) Tap Cancel to abort the Exit command and return to the previous session.
d) Tap Shutdown to continue to exit.
The K2 Dyno S Replay Controller powers off.
98 K2 Dyno S User Manual 20140207
Shutting the system down