Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 48)

Trimming IN or OUT
1. To change the In or Out of a created clip, first cue the clip on a player channel P1 or P2.
2. Use the Jog Knob to find the new points for the clip.
You cannot move outside the cue points on the record train up to the limit of the guard band, as
configured when you created the clip.
3. Once the new point is visible on the record train, press the desired In or Out button.
The new point is marked and the new duration of the clip is displayed in the clip's slot changes.
Creating a clip with one entry point
You can save a clip by using either an In point only or an Out point only.
1. Select only an In or Out point.
2. Press the Add HL button or select a slot in the highlight bin to form a default duration clip.
48 K2 Dyno S User Manual 20140207
Create clips