Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 27)

Configuring T-bar settings: default and alternate
1. On the HOME screen, tap the T-bar section.
The T-bar panel opens.
2. To configure default T-bar settings, select Default .
The T-bar default configuration screen opens.
3. Change default settings as follows:
Description Options
Advance the T-bar to set the maximum speed and tap the top Set
box.
Maximum speed
Pull the T-bar back to the position of the desired minimum speed
and tap the lower Set box.
Minimum speed
20140207 K2 Dyno S User Manual 27
Home Screen