Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 39)

2. For Include guard bands on send , tap Yes to include guard bands when transferring elements to
external devices.
3. For Mount K2 Mapped Drives , tap Yes to automatically mount your K2 mapped drives after the
start-up of K2 Summit and K2 AppCenter.
4. Tap SEND LIST .
The Transfer Destination panel opens and displays all active transfer rules currently set for the
Session.
5. To create a new transfer rule, do the following:
a) Tap BROWSE to specify the destination of the transfer and initiate a new transfer rule.
b) Tap ACCEPT once you have selected the destination.
6. Configure transfer rules as follows:
a) Tap On or Off to activate or deactivate the transfer rule.
b) Tap the second column to transfer a specific or all angles.
c) Tap the third column to change the format received at the destination (MXF,GXF, QT).
d) Tap the fourth column to verify the transfer destination.
7. To create a new destination bin for a transfer, do the following:
a) Tap BROWSE to select the bin in which you are creating the destination bin.
b) Press Shift then tap NEW .
A new destination bin is created.
8. To delete a transfer rule, select the rule to be deleted and then press Shift and tap DELETE .
Revising record and play channel status
To view the current configuration on record and play back channels and revise the current status,
on the
CONFIG screen, tap CHAN LIST .
Resetting configuration
To resets all configuration screens to their factory default settings, on the CONFIG screen tap
RESET CFG .
20140207 K2 Dyno S User Manual 39
Configuration Screen