Grass Valley K2 Dyno S Replay Controller v.3.2 - Manual (Page 17)

Configure Session Channels
1. Select Session name SoftKey.
A touch-screen keyboard displays.
2. Select the Name box, type a name for the session, and then press Enter .
3. Set Loop Record as follows:
a) Set the Loop Record box to On to recycle record space after a given record duration.
The Loop Length box is enabled.
b) Select the Loop Length box and type the record duration before the record train is recycled.
You cannot access the record train beyond this point.
When Loop Record is on, unreferenced media is discarded after the specified loop record length.
4. Press Start to begin the session.
To turn Loop Record on or off while the session is active, on the CONFIG screen select CHAN LIST .
20140207 K2 Dyno S User Manual 17
Dyno Startup