Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 95)

Master Control • iMC-Panel-100 Operator’s Guide 83
5. Menus
XG Keyer Layers Menu
XG Keyer Layers Menu
Figure 5-19 shows the panel’s XG keyer layers menu:
Figure 5-19. XG Keyer Layers Menu
The ‘Main Menu’ button returns you to the main menu.
(The large ‘Intuition XG Layer Control’ button in the main menu takes you to this menu.)
The buttons in the upper row — labeled ‘Menu’— take you to browsers for the named XG layer (1–
8). Not all Intuition XG processors provide 8 layers. Also, your panel might be configured for more
or fewer layers than provided by the Intuition XG processor.
The buttons in the ‘Program’ row cut XG layers to program output (and to the program button row
of the panel).
The buttons in the ‘Preset’ row arm XG layers (which become selected on the preset button row of
the panel).
XG layers are handled by one of the DSKs. The relationship between XG layers and a DSK is not
simple. See
Working with XG Layers on page 115 for information.