Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 153)

Master Control • iMC-Panel-100 Operator’s Guide 141
6. Operation
Panel Startup and Shutdown
Panel Startup and Shutdown
To shutdown or restart the panel, press ‘Panel’ in the main menu to go to the ‘Panel Info menu.
Then go to the ‘Panel Status’ sub-menu:
Choose ‘Shut Down Panel’ to perform a clean shut down. You must later cycle power to restart the
panel.
S Warning: never just shut off power. You risk damage to the panel’s flash memory.
Choose Restart Panel’ to restart the panel.
Please note:
• When the panel is starting up and shutting down, all buttons and knobs are disabled and various
buttons will cycle on and off.
• While the panel is shutting down, it displays a shutdown message.
The front row of buttons on the panel give a ‘Shutdown Complete’ message when it is safe to
cycle power.
• While the panel is starting up, it displays a startup message. When the panel has finished start-
ing up, it automatically attempts to connect to its default channel.