Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 33)

Master Control • iMC-Panel-100 Operator’s Guide 21
3. Control Panel
Functional Sections of the Panel
Menu Area
Figure 3-5 shows the menu area and its 8 associated “knobs”:
Figure 3-5. Menu Area (Sample Showing Knob Proxies)
The menu area presents a number of different menus that allow you to perform source selections
and adjust operating parameters.
Menu buttons allow you to select the menu that appears in the menu area. Menu buttons are tog-
gles: pressing the button once displays the menu; pressing the button again displays the main menu.
Some menus allow you to adjust function parameters, such as the ‘DSK Rates, CGT, and Keying’
menu shown in Figure 3-5. You can adjust function parameters in two ways:
• Using the adjacent knob proxies.
Touch (or click) the knob proxy. Use the slider that appears or the ‘Scroll/Set’ knob that
becomes enabled to adjust the parameter.
• Pressing the keypad image within the menu itself.
Use the on-screen keypad that appears to adjust numeric values.
The menu area has a region at the top for status and error messages and another region at the top for
informative messages.
Refer to Chapter 4, Menus , on page 31 for a comprehensive review of all menus.