Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 28)

16 Rev 1.0 • 29 Nov 11
3. Control Panel
Panel Summary
Soft buttons
The display has 3 rows of button:
• Top row.
There are 8 large buttons in this row. All are configurable buttons. However, the row is
designed to support channel selection buttons that have thumbnail images representing the
channels.
• Aux/user buttons.
The aux/user row has 16 buttons. The leftmost buttons are source buttons that you can use to
direct a source to an auxiliary device. The rightmost buttons (if any) are customer-configurable
buttons.
S The source buttons are identical in all 4 button rows: the aux and preview rows of the dis-
play and the program and preset rows of the button panel.
• Preview/user buttons.
The preview/user row has 16 buttons. All 16 buttons are customer-configurable buttons. (The
button row is used to control the preview bus of an MCE when the panel is controlling an MCE.
Panel Knobs
Turning a knob clockwise increases the associated value until the maximum value is reached. After
that, turning the knob clockwise has no effect.
Turning the knob counter-clockwise decreases the associated value until the minimum value is
reached. After that, turning the knob counter-clockwise has no effect.
The function assigned to a knob might be disabled. In that case, turning the knob does nothing.
S The LED above the ‘Scroll/Set’ knob illuminates when scrolling is enabled.
S The LEDS above the audio monitor buttons illuminate when the monitor is “dimmed.”