Panel status, Operation – Grass Valley iMC-Panel-100 v.7.0.9.0 User Manual
Page 148
136
Rev 1.0 • 29 Nov 11
6. Operation
Using the Panel Menu
Panel Status
From the main menu, press ‘Panel Settings’ to display the ‘Panel Info’ menu. Then press ‘Panel
Status’.
Pressing ‘Update Config’ causes the panel software to restart. ‘Update Config’ can be used to start
the new configuration you have just written to the panel. The process takes a few seconds.
Pressing ‘Restart Panel’ causes a full, hard reboot. This is not recommended unless you are experi-
encing a severe problem or you are installing a new panel configuration. Automation (if present)
will continue to operate any Imagestore 750s during this restart cycle. The process takes about a
minute.
Pressing ‘Shut Down Panel’ causes the panel to stop completely. (You must cycle power to restart
the panel following a shutdown.)
Pressing ‘Purge Thumbs Cache’ causes the panel to empty its cache of Intuition XG thumbnail
images.
‘Test Panel’ presents a sub-menu of tests, described in