Menus – Grass Valley iMC-Panel-100 v.7.0.9.0 User Manual
Page 64
52
Rev 1.0 • 29 Nov 11
5. Menus
Main Menu
• Voice over control
The two buttons in this section access the voice-over 1 and voice-over 2 menus. The button
becomes highlighted (in purple) when the corresponding voice-over is on program output. See
• Audio Meters
The meters in this portion of the screen show the audio levels of the designated audio source
which can be selected in the audio meters menu. See
Touch the meters section to access the audio meters menu.
• Intuition XG, XG layers and Layer groups.
The button on the left, labeled ‘Intuition XG Layer Control’, accesses the
The two buttons on the right, labeled ‘XG Lyr 1–4’ and ‘XG Lyr 5–8’ cause the 4 middle but-
tons at the bottom of the screen to represent XG layers 1–4 or 5–8.
The 4 middle buttons at the bottom represent XG layers.
• DSK controls
Each of the 4 ‘Imagestore DSK’ buttons in the middle of the screen accesses a DSK browser
menu. See
on page 61.
• Miscellaneous controls
The ‘Output Gain’ button accesses the ‘Program Output Audio’ menu. See
on page 72.
The ‘FTS’ button is a status button that turns red when the channel’s program output is in
silence, fading to silence, or fading up from silence.
The ‘FTB’ button is a status button that turns red when the channel’s program output is in
black/silence, fading to black/silence, or fading up from black/silence.
The ‘Panel Settings’ button accesses the panel menu. See
The ‘Channels’ button accesses the channel selection menu. See
on