Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 75)

Master Control • iMC-Panel-100 Operator’s Guide 63
5. Menus
DSK Menus
Clip, Gain, Transparency
At the bottom of the screen are 3 numerical controls for the CGT (clip, gain, and transparency)
parameters. To adjust any of those parameters, either touch the knob proxy associated with the
green asterisk in the control box, or touch the keypad icon to access a large keypad with which to
enter a number. When you touch the knob proxy, a slider appears and the ‘Scroll/Set’ knob
becomes enabled. Use either to adjust the parameter.
Rate Adjustment
When you touch the ‘Adjust Rate’ button, the menu presents rate controls at the bottom:
There are 3 numerical controls for the 3 rates (slow, medium, and fast). To adjust any of those
parameters, either use the knob proxy associated with the green asterisk in the control box, or touch
the keypad icon to access a large keypad with which to enter a number.
Press the ‘Position Size Crop’ button to go to the ‘Position, Size, Crop’ sub-menu.
Press the ‘Back’ button to return to the DSK browser menu.
Press the ‘Main Menu’ button to return to the main menu.
Keying Parameters
The ‘Key Source’ button is a a toggle that switches between ‘Key’ and ‘Self’. ‘Key’ means that the
key includes a key signal. ‘Self’ means that the key is a self-key and does not include a key signal.
The ‘Key Mode’ button is a a toggle that switches between ‘Full’ and ‘Linear’.
The ‘Key Sense’ button toggles between ‘Normal’ and ‘Invert’.