Dsk menus, Menus – Grass Valley iMC-Panel-100 v.7.0.9.0 User Manual
Page 73
Master Control • iMC-Panel-100 Operator’s Guide
61
5. Menus
DSK Menus
DSK Menus
Figure 5-12 shows the panel’s ‘DSK 1 Browser’ menu:
Figure 5-12. DSK 1 Menu
The DSK 2, DSK 3, and DSK 4 browser menus are just like the DSK 1 browser menu.
The DSK browser menus let you select a DSK (downstream key) and specify display parameters
for it.
Touch a DSK thumbnail to select the DSK. Use the scroll bar to view additional thumbnails. The
outer arrows of the scrollbar scroll the list to its top or bottom. The inner arrows scroll the list of
DSKs by one line up or down. The ‘Show Selection’ button causes the list to scroll so that the cur-
rently selected DSK appears in the window. This can be important if you have very many DSKs
from which to choose.
The parameters controlled by the options buttons apply to the most recently selected DSK.
Press the red ‘Load Disabled’ button to enable selection of clips using thumbnails. The button turns
green and reads ‘Load Enabled’ when clip selection is enabled. Disabling loads prevents accidental
select of a clip. Press ‘Load Enabled’ again to re-disable selection of clips.
Press the ‘Clear DSK’ button unselect the currently selected DSK. The result is no selection.
Press the ‘Main Menu’ button to return to the main menu.
XG layers are handled by one of the DSKs. The relationship between XG layers and a DSK is not
simple. See
on page 115 for information.
Options
Buttons
List
Buttons
Scroll
Bar
DSK
Thumbnails