Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 36)

24 Rev 1.0 • 29 Nov 11
3. Control Panel
Functional Sections of the Panel
On-Screen “Knobs” and the Slider
There are 8 knob “proxies” under the menu area:
When you select a knob proxy, it turns green, a slider then appears to the right of the menu area, and
the ‘Scroll/Set’ button of the button panel becomes enabled. Use either the slider or the ‘Scroll/Set’
knob to adjust parameter values.
Figure 3-8 shows the slider and the ‘Scroll/Set’ knob:
Figure 3-8. Slider
The slider scale changes according to the value being adjusted. If you are adjusting an audio level,
the range is –100.0
dB to +28.0 dB. If you are adjusting transparency, the scale shows values in the
range 0 to 512.
The slider is for rapid and coarse adjustment only. Its steps are large and uneven. To operate the
slider, click or touch and drag the oval up or down. The setting value is displayed within the oval.
Audio Monitoring
Figure 3-9 shows the monitor section in which there are 2 knobs and 2 LEDs:
Figure 3-9. Audio Monitor Section
The audio monitor knobs are not used for panels controlling Imagestore 750s, but they are used for
panels controlling MCEs or MCPMs.
Unselected Selected