Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 125)

Master Control • iMC-Panel-100 Operator’s Guide 113
6. Operation
Working with DSKs
Position, Size, and Crop
Press ‘Position Size Crop’ to access a menu in which to change the key’s position or crop bound-
aries. The ‘DSK Position, Size, Crop’ sub-menu appears:
Figure 6-2. DSK Position, Size, Crop Settings (Sample)
There are 4 adjustment buttons in this sub-menu:
• Adjust position.
• Adjust crop.
• Zero position.
• Clear crop.
Position
Either (1) press ‘Adjust Position’ modify the position of the DSK on the screen, (2) press ‘Zero
Position’ to reset its position to (0,0), or use the X and Y controls at the bottom of the window to
enter a position. (Press the keypad icon to enter a number with a keypad or use the knob proxy next
to the parameter’s green asterisk.) The coordinate you choose is of the upper left corner of the
DSK.
The large red outline represents the screen boundary. The darker gray rectangle represents the DSK.
Crop
Either (1) press ‘Adjust Crop’ modify the crop values of the DSK, (2) press ‘Clear Crop’ to reset its
4 crop values 0, or use the four controls at the bottom of the window to enter values. (Press the key-
pad icon to enter a number with a keypad or use the knob proxy next to the parameter’s green aster-
isk.)
The crop values do not change the position value and vice versa.