Grass Valley iMC-Panel-100 v.7.0.9.0 - Manual (Page 41)

Master Control • iMC-Panel-100 Operator’s Guide 29
3. Control Panel
Functional Sections of the Panel
Video Effect Source Status
The touchscreen displays an effect’s source status. Possible fault conditions include LOS and non-
synchronous video.
You can check panel status to view all error conditions. Use the ‘Manage Log’ sub-menu under the
‘Panel’ menu. See page 93.
Voice-Overs
Like video effect buttons, the 2 voice-over button pairs on the program and preset bus are not mutu-
ally exclusive. When an over is selected on the program button row, its audio contributes to pro-
gram audio. When an over is selected on the preset button row, it becomes armed and will play at
the next transition.
S An over function mixes the selected audio source to air, but it does not trigger audio playback.
Voice-Over Button Characteristics
The voice-over buttons use the following color scheme:
Voice-Over Source Status
The touchscreen displays an over’s source status. These are the fault conditions:
If status is “OK,” there will be no message.
The third line of text displays “CUT” or “FADE” depending on how the over was armed. If the
effect is not armed, the third line of the button is blank.
Bottom Row Buttons
These buttons are all configurable:
The configurable button functions are described under Definable Button Functions , on page 30.
Low violet The voice-over is not selected.
High violet The voice-over is selected.
1 LOS
2 Problem