H3C Technologies H3C S6800 Series Switches - Manual (Page 478)

465
Step Command Remarks
2. Create a RIPng process for an
IPv6 VPN instance and enter
RIPng view.
ripng [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Redistribute VPN routes.
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost |
route-policy route-policy-name ] *
By default, no routes are
redistributed into RIPng.
4. (Optional.) Configure the
default cost value for
redistributed routes. default cost value The default value is 0.
5. Return to system view. quit N/A
6. Enter interface view.
interface interface-type
interface-number
N/A
7. Enable the RIPng process on
the interface.
ripng process-id enable
By default, RIPng is disabled on an
interface.
Configuring OSPFv3 between an MCE and a PE
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
N/A
3. Set the router ID. router-id router-id N/A
4. Disable routing loop
detection.
vpn-instance-capability simple
By default, routing loop detection
is enabled.
On an MCE network, you must
disable routing loop detection for
an OSPFv3 VRF process.
Otherwise, the MCE does not
receive OSPFv3 routes from the PE.
5. (Optional.) Configure an
OSPFv3 domain ID.
domain-id { domain-id
[ secondary ] | null }
The default domain ID is 0.
6. Redistribute VPN routes.
import-route protocol [ process-id
| all-processes | allow-ibgp ] [ cost
cost | nssa-only | route-policy
route-policy-name | tag tag | type
type ] *
By default, no routes are
redistributed into OSPFv3.
7. (Optional.) Configure filtering
of advertised routes.
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | isisv6
process-id | ospfv3 process-id |
ripng process-id | static ]
By default, redistributed routes are
not filtered.
8. (Optional.) Configure the
default external route tag for
redistributed VPN routes. default tag tag
By default, the default external
route tag is 1.
9. Return to system view. quit N/A