beautypg.com

Configuring ebgp between an mce and a vpn site – H3C Technologies H3C S6800 Series Switches User Manual

Page 451

background image

438

To configure IS-IS between an MCE and a VPN site:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Create an IS-IS process for a
VPN instance and enter IS-IS

view.

isis [ process-id ] vpn-instance
vpn-instance-name

Perform this configuration on the
MCE. On a VPN site, configure a
common IS-IS process.

3.

Configure a network entity
title.

network-entity net

By default, no NET is configured.

4.

Redistribute remote site routes
advertised by the PE into IS-IS.

import-route protocol [ process-id
| all-processes | allow-ibgp ] [ cost

cost | cost-type { external |
internal } | [ level-1 | level-1-2 |

level-2 ] | route-policy

route-policy-name | tag tag ] *

By default, IS-IS does not
redistribute routes from any other

routing protocol.
If you do not specify the route level
in the command, the command

redistributes routes to the level-2

routing table by default.

5.

Return to system view.

quit

N/A

6.

Enter interface view.

interface interface-type
interface-number

N/A

7.

Enable the IS-IS process on
the interface.

isis enable [ process-id ]

By default, IS-IS is disabled.

Configuring EBGP between an MCE and a VPN site

To run EBGP between an MCE and a VPN site, you must configure a BGP peer for each VPN instance

on the MCE, and redistribute the IGP routes of each VPN instance on the VPN site.
You can configure filtering policies to filter received routes and advertised routes.

1.

Configure the MCE:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter BGP view.

bgp as-number N/A

3.

Enter BGP-VPN instance
view.

ip vpn-instance vpn-instance-name

N/A

4.

Configure an EBGP peer.

peer { group-name | ip-address
[ mask-length ] } as-number
as-number

By default, no BGP peer is
configured.

5.

Enter BGP-VPN IPv4

unicast address family
view.

address-family ipv4 [ unicast ]

N/A

6.

Enable BGP to exchange
IPv4 unicast routes with the

peer.

peer { group-name | ip-address
[ mask-length ] } enable

By default, BGP does not
exchange IPv4 unicast routes

with any peer.