H3C Technologies H3C S6800 Series Switches - Manual (Page 3)

Preface
The H3C S6800 documentation set includes 17 configuration guides. These guides describe the
software features for the H3C S6800 Switch Series and guide you through the software configuration
procedures. These guides also provide configuration examples to help you apply software features to
different network scenarios.
The MPLS Configuration Guide describes features and tasks that help you configure MPLS and its
extended functions, including basic MPLS, MPLS TE tunnel setup, and MPLS VPN.
This preface includes:
• Audience
• Conventions
• About the H3C S6800 documentation set
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the S6800 series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] * Asterisk marked square brackets enclose optional syntax choices separated by vertical