Vpls configuration examples, Static pw configuration example, Network requirements – H3C Technologies H3C S6800 Series Switches User Manual
Page 398
385
Task Command
Display LDP PW label information.
display l2vpn ldp [ peer ip-address [ pw-id pw-id ] | vsi
vsi-name ] [ verbose ]
Display L2VPN forwarding information.
display l2vpn forwarding { ac | pw } [ vsi vsi-name ] [ slot
slot-number ] [ verbose ]
Display MAC address table information for
VSIs.
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ]
[ count ]
Display L2VPN PW information.
display l2vpn pw [ vsi vsi-name ] [ protocol { bgp | ldp |
static } ] [ verbose ]
Display PW class information.
display l2vpn pw-class [ class-name ]
Display Ethernet service instance information.
display l2vpn service-instance [ interface interface-type
interface-number [ service-instance instance-id ] ] [ verbose ]
Display VSI information.
display l2vpn vsi [ name vsi-name ] [ verbose ]
Display information about automatically
discovered VPLS PEs.
display l2vpn auto-discovery [ peer ip-address ] [ vsi
vsi-name ]
Display VPLS label block information.
display l2vpn bgp [ peer ip-address | local ] [ vsi vsi-name ]
[ verbose ]
Display BGP L2VPN peer group information.
display bgp group l2vpn [ group-name group-name ]
Display VPLS PE information discovered by
BGP.
display bgp l2vpn auto-discovery [ peer ip-address
{ advertised | received } [ statistics ] | route-distinguisher
route-distinguisher [ pe-address ip-address [ advertise-info ] ]
| statistics ]
Display VPLS label block information
discovered by BGP.
display bgp l2vpn signaling [ peer ip-address { advertised |
received } [ statistics ] | route-distinguisher route-distinguisher
[ site-id site-id [ label-offset label-offset [ advertise-info ] ] ] |
statistics ]
Display BGP L2VPN peer information.
display bgp peer l2vpn [ ip-address mask-length |
{ ip-address | group-name group-name } log-info |
[ [ ip-address ] verbose ] [ standby slot slot-number ] ]
Display BGP L2VPN update group
information.
display bgp update-group l2vpn [ ip-address ]
Clear MAC address entries for VSIs.
reset l2vpn mac-address [ vsi vsi-name ]
Reset L2VPN BGP sessions.
reset bgp { as-number | ip-address [ mask-length ] | all |
external | group group-name | internal } l2vpn
For more information about the display bgp group l2vpn, display bgp peer l2vpn, display bgp
update-group l2vpn, and reset bgp commands, see Layer 3—IP Routing Command Reference.
VPLS configuration examples
Static PW configuration example
Network requirements
Configure VPLS on each PE, and establish static PWs between the PEs to interconnect the CEs.