beautypg.com

Configuring inter-as option c – H3C Technologies H3C S6800 Series Switches User Manual

Page 206

background image

193

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter interface view of the
interface connected to an

internal router of the AS.

interface interface-type
interface-number

N/A

3.

Enable MPLS on the interface. mpls enable

By default, MPLS is disabled on the
interface.

4.

Enable MPLS LDP on the

interface.

mpls ldp enable

By default, MPLS LDP is disabled
on the interface.

5.

Return to system view.

quit

N/A

6.

Enter interface view of the
interface connecting to the

remote ASBR.

interface interface-type
interface-number

N/A

7.

Enable MPLS on the interface. mpls enable

By default, MPLS is disabled on the
interface.

8.

Return to system view.

quit

N/A

9.

Enter BGP view.

bgp as-number

N/A

10.

Create a BGP peer.

peer { group-name | ip-address
[ mask-length ] } as-number
as-number

By default, no BGP peer is
configured.
Configure PEs in the same AS as
IBGP peers, and ASBRs in different

ASs as EBGP peers.

11.

Enter BGP VPNv4 address
family view.

address-family vpnv4

N/A

12.

Enable BGP to exchange
VPNv4 routes with the PE in

the same AS and the ASBR in

different ASs.

peer { group-name | ip-address
[ mask-length ] } enable

By default, BGP cannot exchange
VPNv4 routing information with a

peer.

13.

Disable route target based
filtering of VPNv4 routes.

undo policy vpn-target

By default, the PE filters received
VPNv4 routes by route targets.
The routes surviving the filtering

are added to the routing table, and
the others are discarded.

Configuring inter-AS option C

To configure inter-AS option C, configure PEs and ASBRs.

PE configuration:

{

Configure basic MPLS L3VPN, and specify the PE in another AS as an MP-EBGP peer. The route
targets for the VPN instances on the PEs in different ASs must match for the same VPN.

{

Execute the peer ebgp-max-hop command to enable the local router to establish an EBGP
session to an indirectly-connected peer because the PEs are not directly connected.

{

Specify the ASBR in the same AS as an IBGP peer, and enable BGP to exchange labeled IPv4
unicast routes with the ASBR.