H3C Technologies H3C S6800 Series Switches - Manual (Page 190)

177
Figure 55 Network diagram for BGP/OSPF interaction
As shown in Figure 55 , CE 11, CE 21, and CE 22 belong to the same VPN and the same OSPF domain.
Before a domain ID is configured, VPN 1 routes are advertised from CE 11 to CE 21 and CE 22 by using
the following process:
1. PE 1 redistributes OSPF routes from CE 11 into BGP, and advertises the VPN routes to PE 2 through
BGP.
2. PE 2 redistributes the BGP routes to OSPF, and advertises them to CE 21 and CE 22 in AS External
LSAs (Type 5) or NSSA External LSAs (Type 7).
After a domain ID is configured, VPN 1 routes are advertised from CE 11 to CE 21 and CE 22 by using
the following process:
1. PE 1 redistributes OSPF routes into BGP, adds the domain ID to the redistributed BGP VPNv4
routes as a BGP extended community attribute, and advertises the routes to PE 2.
2. PE 2 compares the domain ID in the received routes with the locally configured domain ID. If they
are the same and the received routes are intra-area or inter-area routes, OSPF advertises these
routes in Network Summary LSAs (Type 3). Otherwise, OSPF advertises these routes in AS External
LSAs (Type 5) or NSSA External LSAs (Type 7).
Routing loop avoidance
Figure 56 Network diagram for routing loop avoidance
文件中找不到关系 ID 为 rId77 的图像部件。
文件中找不到关系 ID 为 rId78 的图像部件。