H3C Technologies H3C S6800 Series Switches User Manual

Page 364

351

[P-LoopBack0] ip address 192.4.4.4 32

[P-LoopBack0] quit

[P] mpls lsr-id 192.4.4.4

# Configure VLAN-interface 20 (the interface connected to PE 1), and enable MPLS on the
interface.

[P] interface vlan-interface 20

[P-Vlan-interface20] ip address 10.1.1.2 24

[P-Vlan-interface20] mpls enable

[P-Vlan-interface20] quit

# Configure VLAN-interface 30 (the interface connected to PE 2), and enable MPLS on the

interface.

[P] interface vlan-interface 30

[P-Vlan-interface30] ip address 10.2.2.2 24

[P-Vlan-interface30] mpls enable

[P-Vlan-interface30] quit

# Configure a static LSP to forward packets from PE 1 to PE 2.

[P] static-lsp transit pe1-pe2 in-label 201 nexthop 10.2.2.1 out-label 202

# Configure a static LSP to forward packets from PE 2 to PE 1.

[P] static-lsp transit pe2-pe1 in-label 102 nexthop 10.1.1.1 out-label 101

Configure PE 2:
# Configure an LSR ID.

system-view

[PE2] interface loopback 0

[PE2-LoopBack0] ip address 192.3.3.3 32

[PE2-LoopBack0] quit

[PE2] mpls lsr-id 192.3.3.3

# Enable L2VPN.

[PE2] l2vpn enable

# Configure VLAN-interface 30 (the interface connected to P), and enable MPLS on the interface.

[PE2] interface vlan-interface 30

[PE2-Vlan-interface30] ip address 10.2.2.1 24

[PE2-Vlan-interface30] mpls enable

[PE2-Vlan-interface30] quit

# Create VLAN 10 and assign FortyGigE 1/0/1 to the VLAN.

[PE2] vlan 10

[PE2-vlan10] port fortygige 1/0/1

[PE2-vlan10] quit

# Create service instance 10 on FortyGigE 1/0/1 to match packets that have an outer VLAN ID
of 10.

[PE2] interface fortygige1/0/1

[PE2-FortyGigE1/0/1] service-instance 10

[PE2-FortyGigE1/0/1-srv10] encapsulation s-vid 10

[PE2-FortyGigE1/0/1-srv10] quit

[PE2-FortyGigE1/0/1] quit

# Create a cross-connect group named ccc, and create a remote CCC connection that has
incoming label 202, outgoing label 102, and next hop 10.2.2.2.

This manual is related to the following products: