Teac DP-24 - Manual (Page 95)

TASCAM DP-24
95
16 – Messages
Work Memory Full
The work memory is full.
Even if the SD card has enough remaining space, this error may occur when you perform many
editing operations. You may be able to continue the work if execute the
DELETE UNUSED
item of the
SONG
menu to increase the available space in the work memory. (See "Undoing an
operation" on page 50.)
Audio Rst Fail
If any of these errors occur, turn the unit power off and restart it.
If these error messages continue to appear, please contact a TEAC Service Center.
Device Error
File Error
No CD Drive
Not Continued
Remote Cmd
Remote Rx
Sys Rom Err
System Err 50
System Error 1
System Error 2
System Error 3
System Error 4
System Error 5
System Error 6
System Error 7
System Error 8
System Error 9
Writing Failed
CD mode messages
The following pop-up messages appear when the unit is in CD mode (when the
CD
menu screen or one of its submenus is
open).
Refer to this chart when you want to understand the meaning of these messages and how you should respond to them.
Message Description and remedy
Blank CD
Insert CD-RW A blank CD has been inserted. Insert a CD-RW that is not blank.
An erased CD-RW or unwritten CD-RW has been set with the
ERASE
item of the
CD
menu
screen.
There is no need to erase the inserted CD-RW.
Blank CD
Insert Opened CD A blank CD has been inserted. Insert a non-finalized CD-R/CD-RW.
An erased CD-R/CD-RW or unwritten CD-R/CD-RW has been set with the
FINALIZE
item of
the
CD
menu screen. Insert the CD-R/CD-RW that you want to finalize.
Finalized CD
Insert CD-RW
A finalized CD-RW has been inserted. Insert a non-finalized CD-RW.
A finalized CD-R/CD-RW has been inserted with the ERASE item of the CD menu screen. Only
CD-RW discs can be erased.
Finalized CD
Insert Opened CD A finalized CD-R/CD-RW has been inserted. Insert a non-finalized CD-R/CD-RW.
A finalized CD-R/CD-RW has been inserted with the
FINALIZE
item of the
CD
menu screen.
This CD-R/CD-RW does not need to be finalized.
Import File Too
Big Size of file to be imported is too big.
The size of the file to import equals or exceeds the free space on the SD card when executing
an import with the
CD-DA IMPORT
item of the
CD
menu screen.
Create more free space on the SD card by erasing the undo operation history, for example, to
ensure sufficient free space for reading the import file.
Invalid CD
Insert Blank CD An invalid CD-R/CD-RW has been inserted. Insert a blank CD.
When you try to write to a CD-R/CD-RW using the
MASTER WRITE
or the
CD BACKUP
item of the
CD
menu screen, but inserted a CD-R/CD-RW that is not a blank CD. (When writing
with Track At Once, this message appears if a finalized CD-R/CD-RW is set.)
Insert a blank CD.