Teac DP-24 - Manual (Page 56)

56
TASCAM DP-24
7 - Recorder Functions
Now, jog sounds can be heard. (Jog sound refers to a
repeat playback sound of a short period.)
4. Use the JOG/DATA dial to find a cue point while
changing the jog sound playback position.
5. When the cue point is determined, press the JOG
PLAY button to return to the Home screen.
NOTE
The transport button is available even in search mode.
However, while the timeline is displayed, pressing the
PLAY button switches between the normal playback
and jog sound playback, and pressing the STOP button
performs jog sound playback.
Repeat playback
Use the repeat playback function to play the same part
again and again.
The repeat playback interval is the section between the IN
and OUT points.
Setting IN/OUT points
In addition to setting the repeat playback interval, the
IN and OUT points are also used to set track editing
intervals and as the punch in and punch out points
when automatically punching in and out. Moreover,
these points are used as the start and end points of the
mixdown master file when creating a master file.
You can set these points during recording, playback or
when the unit is stopped.
NOTE
The IN and OUT points cannot be set or edited in the
following cases.
In Repeat Playback mode •
In • Auto Punch mode
In • Mastering mode of the Recorder mode
Using IN/OUT points ª
Regardless of whether the unit is stopped, playing back
or recording, when the recorder is at the desired position,
press and hold the MARK SET button and press the IN or
OUT button.
The position where you pressed the IN/OUT button is set
and the time is displayed on the Home screen.
Locating IN/OUT points ª
When stopped or during playback, press the IN or OUT
button.
Using repeat playback
1. Set the IN point and the OUT point you want
to make the start and end points of the repeat
playback interval, and then return to the Home
screen.
2. Press the REPEAT button.
The icon appears on the Home screen, and repeat
playback starts.
After the playback starts from the IN point and reaches
the OUT point, it returns to the IN point and repeats.
Playback continues to repeat between the IN and OUT
points.
3. To cancel the repeat playback, press the REPEAT
button, so that the icon disappears from the
Home screen.
Moving back a few seconds for
replay (jump back playback)
Press the JUMPBACK (PREVIEW) button during playback
to move back a few seconds (adjustable) and restart
playback (Jump back function).
If you want to hear a passage again during playback,
press the JUMPBACK (PREVIEW) button to go back a few
seconds and replay that passage.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight)
PREFERENCE
,
and then press the F4 (t) button.
The
PREFERENCE
screen appears.
Repeat icon