Move/paste, Move/insert, Open (insert silence) – Teac DP-24 User Manual
Page 62: Cut (remove part), 8 - track editing
62
TASCAM DP-24
8 - Track Editing
MOVE/PASTE
IN
OUT
TO
IN
OUT
TO
The audio data between the IN and OUT points on the MOVE
source track is removed and pasted on the MOVE destination
track starting from the TO point. This operation leaves a silence
between the IN and OUT points on the MOVE source track.
This operation overwrites recorded data on the MOVE
destination track. Therefore, the length of the MOVE
destination track is not changed.
The following parameters are used in this operation.
SOURCE Track
•
(
1
to
12
,
13/14
to
23/24
,
ALL
)
IN/OUT/TO
•
TARGET Track
•
MOVE/INSERT
IN
OUT
TO
IN
OUT
TO
The audio data between the IN and OUT points on the MOVE
source track is removed and inserted in the MOVE destination
track starting from the TO point. This operation leaves a silence
between the IN and OUT points on the MOVE source track.
This operation inserts recorded data into the MOVE
destination track starting from the TO point. Therefore, the
MOVE destination track becomes longer.
The following parameters are used in this operation.
SOURCE Track
•
(
1
to
12
,
13/14
to
23/24
,
ALL
)
IN/OUT/TO
•
TARGET Track
•
OPEN (Insert Silence)
IN
OUT
IN
OUT
This function inserts silence between the IN and OUT
points on the selected track.
This function splits the track at the IN point and shifts the
recorded data after the IN point to after the OUT point.
Therefore, the track becomes longer.
The following parameters are used in this operation.
TARGET Track
•
(
1
to
12
,
13/14
to
23/24
,
ALL
)
IN/OUT
•
CUT (Remove Part)
IN
OUT
IN
This function cuts (deletes) the audio data between the
IN and OUT points on the selected track, and shifts the
remaining recording after the OUT point forward to the IN
point. Therefore, the track becomes shorter.
The following parameters are used in this operation.
TARGET Track
•
(
1
to
12
,
13/14
to
23/24
,
ALL
)
IN/OUT
•