Rear panel, 3 – names and functions of parts – Teac DP-24 User Manual
Page 29
TASCAM DP-24
29
3 – Names and Functions of Parts
Rear panel
S
STANDBY/ON button
When the power is OFF (standby), press and hold this
button to turn the power on. When power is ON, press
and hold this button to turn the power off (standby).
(See "Start-up & Shutdown" on page 35.)
D
SD card slot
Insert the SD card into this slot.
F
USB port
Use the included USB cable to connect with a
computer USB port. (See "Connecting to a computer"
on page 80.)
CAUTION
Always connect the unit directly to a computer. Do not
use a USB hub.
G
GROUND connector
Depending on the use environment, you might
hear noise when monitoring. If this occurs, use this
connector to ground the unit. (Please prepare the
necessary wiring yourself.)
H
Kensington lock attachment hole
J
DC IN 12V jack
Connect the supplied TASCAM PS-1225L AC adapter.
K
Cord holder
Wrap the cord of the supplied TASCAM PS-1225L AC
adapter around this holder to prevent the plug from
becoming disconnected accidentally.
L
MIDI OUT jack
This is a standard 5-pin DIN MIDI output jack.
This jack is used for MIDI signal output.
:
MIDI IN jack
This is a standard 5-pin DIN MIDI input jack.
This jack is used for MIDI signal input.
Z
MONITOR OUT jacks (standard balanced TRS jacks)
These jacks output the signal selected in the monitor
section of the top panel. These are standard balanced
phone jacks.
X
EFFECT SENDS jacks (standard unbalanced TS
jacks)
These jacks output the signal from effect sends 1 and 2.
C
STEREO OUT jacks (unbalanced RCA jacks)
These jacks output the stereo bus signal.
V
LINE-GUITAR switch
You must set this switch according to the input
source of the MIC/LINE INPUTS H. When connecting
directly an electric guitar, electric bass or other
similar instrument, set this switch to GUITAR.
When connecting a digital instrument or an audio
equipment, set it to LINE.
B
MIC/LINE INPUTS A-H jacks (balanced)
These are balanced analog XLR/TRS combo jacks for
microphone and line inputs.
XLR (1: GND, 2: HOT, 3: COLD)
•
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
•