16 – messages, General messages – Teac DP-24 User Manual
Page 93
TASCAM DP-24
93
16 – Messages
General messages
The following list shows the messages that may pop up during the use of the unit.
These messages alert you to conditions that may arise while you are using the unit. Consult the table below if you see
something you do not understand or if you want to know how to solve a problem.
Message
Description and remedy
Can not Import
This pop-up appears when the Sample Rate or Sample Bit of the selected file in the AUDIO
DEPOT-IMPORT menu differs from the current song.
Cannot Clear
Current
The current track cannot be deleted.
A virtual track assigned to a physical track cannot be deleted.
Card Error
The card could not be handled properly. Replace the card.
Card Full
The card has no remaining capacity. Erase unnecessary files or move them to your computer to
make open space.
Empty Export
Track
You tried to export a track that does not contain any recording data.
This pop-up appears if you try to export a song track that does not contain any recording. (See
"Exporting tracks" on page 83.)
Export a song track that has been recorded.
Export File Too
Big
The track to be exported exceeds the SD card available capacity.
You have tried to export a track to the AudioDepot folder, but the size is too large for the
remaining space on the SD card.
Delete unnecessary songs or files from the AudioDepot folder to create more space on the SD
card, then try to export the track again.
File Not Found
File to be imported could not be found.
You tried to import a WAV file from the AudioDepot folder, but there is no WAV files in it. (See
"Importing tracks" on page 82.)
Connect the unit to a computer and transfer the files that you want to import from the
computer to the AudioDepot folder of the unit.
Format Error
Format CARD
The formatting of the card is abnormal or corrupted. This message also appears if you
formatted the card for FAT format using a computer connected via USB and if an unformatted
card is inserted in the unit.
Always use the DP-24 to format cards to be used with it. Replace the card or format the card
using the
FORMAT
menu.
Execution of FAT formatting erases all data currently on the card.
I/O Too Short
Interval between IN and OUT points is too short.
You tried to enter repeat mode, but the time between the IN and OUT points is too short.
Import Failed
Export Failed
Import or export failed.
Import File Too
Large
Size of file to be imported is too big.
You tried to import a WAV file from the AudioDepot folder that is too large for the remaining
space on the SD card. Free up some space in the AudioDepot folder by deleting unnecessary
songs, and try again.
In Bounce Mode
Bounce
mode is active.
You tried to perform an action that cannot be done while in
Bounce
mode.
In Master Mode
Mastering
mode is active.
You tried to perform an action that cannot be done while in
Mastering
mode.
In Punch Mode
Auto Punch
mode is active.
You tried to perform an action that cannot be done while in
Auto Punch
mode.
In Repeat Mode
Repeat Playback mode is active.
You tried to perform an action that cannot be done while in Repeat Playback mode.
Invalid Card
The format of the inserted SD card cannot be used in this unit.
Insert another SD card after turning off the unit, or format the card using
FORMAT
on the
MENU
screen.
Invalid Card
Change Card
Something might be wrong with the card. Replace the card.
Mark Full
It is not possible to register more location marks.
You tried to store more than 99 location marks in a song. (See "Location marks" on page 54.)
Delete some location marks and try again.