Teac DP-24 - Manual (Page 22)

22
TASCAM DP-24
2 - Quick Guide
Writing to a CD-R/CD-RW
When writing to a CD-R/CD-RW, the procedure differs
between when you are choosing multiple master files and
when you are choosing only one file.
In this example, we will select multiple master files to
create a CD that can be played in ordinary CD players.
For details about writing to a CD-R/CD-RW, see "Creating
an Audio CD" on page 87.
1. When Recorder mode is
Multi Track
mode,
press the CD button to open the
CD
menu screen.
2. Place a blank CD (unused CD-R/CD-RW disc or a
completely erased CD-RW) on the disc tray.
3. Use the JOG/DATA to select
MASTER WRITE
and
then press the F4 (t) button.
This opens the
MASTER WRITE
screen and shows a
list of songs that have been recorded in master files.
4. Use the JOG/DATA dial to select (blue highlight) a
song that you want to write to the CD-R/CD-RW,
and then press the F2 (4) button.
A check mark 4 appears in the check box next to the
song.
NOTE
To remove the check mark 4 from a check box, press the
F2 (4) button again while the song with 4 is selected
(blue highlight).
5. Repeat step 4 above as necessary.
6. When you select all songs to be written, press the
F4 (t) button. The
WRITE SONG LIST
screen
appears.
On this screen, you can change the order that the
master files will be written to the CD-R/CD-RW and set
the gaps between them. (For details about changing
the order and setting the gaps, see "Creating an Audio
CD" on page 87).
7. Press the F4 (t) button again and a confirmation
pop-up window will appear.
8. Press the F2 (
YES
) button to begin writing to the
CD-R/CD-RW.
9. When writing is completed, a message asking
whether you want to write another CD-R/CD-RW
with the same contents appears.
If you want to write the same contents to another
CD-R/CD-RW, press the F2 ( YES
) button.
To finish the procedure, press the F1 (
NO
) button.