Super Systems 3 Series - Manual (Page 89)

Series 3 Operations Manual
89
14.3.6 To Return to Factory Calibration
It is always possible to revert to the factory calibration as follows
Operation Do This Display View Additional Notes
Select the calibration phase
1. From the ‘CAL’ list header press to
select ‘PHASE’
n o n e
p h a s e
Select factory calibration
values
2. Press  or  to choose ‘FAct’
Confirm
3. Press to select ‘GO’
4. Press  or  to choose ‘yes’
The controller automatically returns to the
factory values stored during manufacture