Super Systems 3 Series - Manual (Page 70)

Operations Manual Series 3
70
13.2 Digital Communications Parameters
The following table shows the parameters available.
DIGITAL COMMUNICATIONS LIST ‘comms’
Name Scrolling
Display Parameter Description Value Default Access
Level
I D MODULE
IDENTITY Comms identity Conf
L3 R/O
A D D R COMMUNICA
TIONS
ADDRESS Communications address
of the instrument 1 to 254 1 L3
B A U D COMMUNICA
TIONS BAUD
RATE Communications baud
rate 1200 1200 9600 Conf
L3 R/O
2400 2400
4800 4800
9600 9600
19.20 19,200
P R T Y COMMUNICA
TIONS
PARITY Communications parity none No parity none Conf
L3 R/O
Even Even parity
Odd Odd parity
D E L A Y RX/TX DELAY
TIME To insert a delay between
Rx and Tx to ensure that
drivers have sufficient time
to switch over. Off No delay Conf
L3 R/O
on Fixed delay applied
r e t r a n COMMS
RETRANSMIS
SION Master comms broadcast
parameter.
none None none
W.SP Working setpoint
PV Process Variable
OP Output demand
Err Error
r e g . a d COMMS
RETRANSMIS
SION
ADDRESS Parameter added in the
Slave address to which the
master communications
value will be written 0 to 9999 0