Super Systems 3 Series - Manual (Page 40)

Operations Manual Series 3
40
9.1.9 AA Relay (AA) (Output 4)
This is a changeover relay. Connections are made to terminals AA, AB, and AC. The way in which this relay operates is
determined by parameters in the AA List. OP4 beacon is operated from the AA relay output channel.
AA RELAY ‘aa’
Name Scrolling
Display
Parameter Description Value Default Access Level
4.TYPE OUTPUT 4
TYPE Output channel 4 hardware
type reLy Relay output reLy Read only
4.FUNC FUNCTION Output channel 4 function
If the instrument is ordered as
Valve Position (codes VC or
VP), only values none, d.out,
UP,
or dwn are available
Note: If output 4 is set to up
ensure the other valve
position output is set to dwn
and vice versa
none Disabled d.OUt Conf
d.OUt Digital output
Heat Heat output
CooL Cool output
4.SRC.A I/O 4 SOURCE A These parameters only appear
when the channel function is a
Digital OP,
i.e. 4.FUNC = d.Out
Selects an event status to be
connected to the output
channel.
The output status is the result
of an OR of Src A, Src B, Src C,
and Src D
Up to four events can,
therefore, operate the output
none No event connected to the output none Conf
AL1 Alarm 1 *
4.SRC.B
I/O 4 SOURCE B
AL2
Alarm 2 *
AL3 Alarm 3 *
4.SRC.C I/O 4 SOURCE C AL4 Alarm4 *
ALL.A All alarms
4.SRC.D I/O 4 SOURCE D nw.AL Any new alarm
Ct.AL CT alarm, load, leak & overcurrent
Lbr Loop break alarm
Sbr Sensor break alarm
mAn Manual status
rmt.F
Remote fail
Pwr.f Power fail
prg.e FEATURE UNAVAILABLE
4.SENS SENSE To configure the polarity of
output channel 4 nor Normal nor Conf
Inv Inverted
* The mnemonic for the alarm will change depending upon the alarm configuration.