RLE Falcon EM - Manual (Page 97)

User Guide: Falcon FMS Communication
www.rletech.com 970 484-6510 83
Figure 5-24: BACnet /Slave Unit Configuration
5-9.2 Unit Number Links
Select the Slave’s Unit # link to display the following page and allow for individual Slave configuration.
Refer to section 5-4 Configuring Inputs and relays for Slave Units (Modbus & BACnet), pg. 71, for details
on how to configure the option presented here.
Figure 5-25: Individual Slave Unit Configuration Screen
5-9.3 BACnet Instance Register Links
Selecting a BACnet Instance Register link at the bottom of the BACnet Slave Unit Configuration page
will display the following. Figure 5-26, pg. 84, shows the navigation screen for configuring the BACnet
registers.